RBOSCHCO:boron powder, Zinc sulfide, Molybdenum disulfide, Quartz powder, Silica powder, Zirconium carbide & Manufacturer.
Recently, US President Joe Biden concluded his first visit to the Middle East since taking office. During the visit, Biden said that the United States will be an active partner in the Middle East for a long time, but Middle East leaders have not clearly responded to the United States' intention to establish a regional security alliance. In addition, Biden failed to persuade Saudi Arabia and other countries to increase oil sodium silicate are still very uncertain.
Is there any material with higher temperature performance than graphite?
Boron nitride, which is a little expensive, can be bought as a ready made crucible.
Tungsten is expensive and can be processed into various shapes. It does not react with oxide melt and is not resistant to oxidation.
Zirconium boride and titanium boride have super melting points, but it is difficult to obtain dense blocks.
Beryllium oxide is very expensive and toxic.
Magnesium oxide, which is a little cheaper, does not react with metals.
How to remove titanium diboride coating on stainless steel after vacuum plating
It can be sandblasted with glass shot water,
As titanium diboride is acid resistant, it can be tested with high concentration caustic soda solution
However, it is estimated that the effect of the above two methods will not be very good
Because the chemical properties of titanium diboride are relatively stable and the hardness is very high.
If the coating is not very thick, the sandblasting effect is better.
Material properties of titanium diboride
Coefficient of thermal expansion 8.1 × 10-6m/m.k
Resistivity 14.4 μ Ω.cm
Oxidation resistance temperature (in air) ℃
Stable in HCl and HF acids
Introduction of titanium diboride
Titanium diboride powder is gray or gray black, with hexagonal (AlB2) crystal structure. Its melting point is ℃ and it has high hardness. The oxidation resistance temperature of titanium diboride in air can reach ℃, and it is stable in HCl and HF acid. Titanium diboride is mainly used to prepare composite ceramic sodium silicate, please feel free to contact us and send an inquiry.
Thanks for using aii article generator（ http://www.aiivip.com )Nano silica powderHow to preserve nano silica powder? Is silicon powder easy to be oxidized?The finer the particle size, the easier the oxidation. Do not expose to the air for a long time…
Oil futures tumbled more than $5 a barrel on news that the Biden administration is considering releasing about 1 million barrels a day from the U.S. Strategic Petroleum Reserve (SPR) for several months to cool surging crude prices.Brent crude futures…
Titanium carbide TiC powder is a crystalline solid with gray metallic luster, hard quality, second only to diamond in hardness, and weaker in magnetic properties. For the manufacture of cemented carbide, also used as electrodes and abrasives for arc…